产品

EnviroStart 超越了传统的软起动系统，它可以逐渐加大电压电流，提供合适的电能．而EnviroStart 电动机优化器比这个功能更多．

它利用强大的微型控制技术监控电动机的运转，确保输入电能和负载变化完全吻合． EnviroStart 可以感应到电动机的任何改变，包括电动机的起动和停机，从而在12 毫秒之内根据需要改变负载.

这样不仅节省电费还可以减少电动设备的磨损，为电动机和连接的负载提供保护．平缓的加速和减速减少了对变速系统的压力，从而增加电动机寿命，减少维护费用

除此之外， EnviroStart 还专注于设计适用于应用领域中出现的电源供应波动和气候等问题的节能产品。所有产品都经过测试， 即使将电压调节到满电压的 60 ％也不会对产品本身及电动机造成过热和损坏

EnviroStart 产品中的软起动和电动机优化器适用于各种鼠笼式交流感应电动机和高速滑环电动机，而且安装简便。

由于 EnviroStart 产品把电动机每时每刻的供需能量要求联系在一起，并使电动机的供应能量随需求能量的变化而变化，所以电动机总是在最优化的状态下进行工作。

从安装的那刻起， EnviroStart 产品将会给您的投资带来回报。成本回收年数是依赖于电动机电源需求和电费成本的，但是即使是很小的企业，也能立即看到电源消耗成本的迅速下降。

EMS (European) have also designed a single phase smart MEC, integrating real time clock switch-on, switch-off capability with motor energy control and dead band management. Energy savings of over 40% are readily achieved using the Enviro+ products.

During the course of mid 2007 EMS (European) added power factor correction systems to their product range with the introduction of the EnviroVAr systems. Providing standard and detuned systems which incorporate harmonic reduction components. EnviroVAr is a high specification site reactive power compensation component.

In early 2009 EMS (European) added the EnviroCab small business power factor correction systems providing a standard 10kVAr to 50kVAr correction unit for use where low levels of compensation are required. Complementing this local Pf correction elements were also made available for environments where only one or two inductive loads were to be found on a site.

Also available are the DVR and DPR control systems allowing high resolution control of resistive heating elements providing simple energy savings in excess of 20% without changing the operational profile of the controlled system in any way.